Skip to main content
FREE Delivery!|(401) 210-4557
Bulk Aggregate Delivery Across Providence County, RI

Bulk Aggregate Delivery Across Providence County, RI

Rhode Island Rock Supply handles gravel, stone and aggregate delivery in Providence County, RI. Start with processed gravel, the base material this state builds drives and pads on.

Size the load on the calculator, then pick your delivery date at checkout.

Ground here changes fast from lot to lot. Old fill, buried slab and ledge can all turn up in the same neighbourhood, so the base you plan for matters more than the surface you see.

Delivery across Providence County

Order online and a dump truck tips your load on site. Quantities are ordered by the ton or by the yard, and every product page has a calculator so you can size the load before you check out.

Pick a delivery date at checkout that suits your schedule. Rhode Island Rock Supply covers Providence, Cranston, Pawtucket, East Providence, Woonsocket, Cumberland, North Providence, Johnston, Lincoln, Central Falls, Smithfield, North Smithfield, Greenville and Pascoag.

Bulk delivery means one pile of material dropped where the truck can reach. Have the area clear and the access wide enough for a dump truck before the load arrives.

Materials delivered in Providence County

Processed gravel is the standard Rhode Island base material, also called process. It is aggregate crushed or screened from natural boulder, cobble and gravel.

M.01.02 covers gravel borrow, which is bank run sand and gravel or plant processed gravel.

The gradation columns of M.01.09 Table I set the sizes, with Section 301 for aggregate and gravel base courses and Section 302 for gravel borrow subbase courses.

Town road standards stack the same two layers: bank run gravel borrow below, processed gravel above. That is the same order a driveway base follows, and it is why the two materials are usually ordered together.

Drainage stone runs in inch sizes here. 3/8 inch crushed stone suits fine drainage and pipe bedding, while 1 1/2 inch crushed stone, listed as #4 Crushed Stone, handles heavy drainage and trench bottoms.

For French drains and drywells, #57 Stone and Drain Rock are the clean washed sizes. Shoreline and culvert work takes RipRap in the 4 to 10 inch range.

Finishing materials round out a job. Screened loam, which landscapers here call loam or screened topsoil, feeds lawns and bed prep, and Top Soil is sold screened.

Washed Sand mixes concrete and beds pipe, and Mason Sand handles brick and block mortar.

Ground conditions across Providence County

This county spans more than one ground region, so conditions change from the bay lowland to the western uplands and up the Blackstone Valley. The working season is the first thing to plan around.

Base, drive and paver work runs from the thaw in March through late fall in the bay lowland, a few weeks longer than in the hill towns. Frozen ground stops compaction in midwinter, so timing a delivery matters.

In the western uplands the season is the shortest in the state. Work waits for frost to come out and the till to drain in spring, and finishes earlier in the fall than on the coast.

Drainage separates the zones. Dense till with a hardpan layer sheds water rather than taking it, so snowmelt and thaw sit on the surface and run down slope across drives.

Sand and gravel terraces on the valley floor drain fast while the till on the valley walls above them does not.

In the bay lowland, tight urban lots with a high paved fraction shed water fast onto whatever sits next to them, and made ground settles unevenly and holds it. Storm surge at the head of the bay drives the erosion case there.

Frost depth is 40 inches by state code, and the town building official sets footing depth. City drives with a thin base show the freeze and thaw cycle as spring potholes and settled aprons.

Choosing the right material

Kent County shares ground regions with Providence County, spanning the Narragansett Bay lowland and the western uplands. The ground itself is the same, so the base and drainage choices carry over rather than changing at the county line.

Pick by what the material has to do. Processed gravel compacts into a base for drives, pads and walks.

Bank run gravel fills and raises grade below it. Clean washed stone moves water in drains and drywells.

For flatwork, stone dust beds pavers and flagstone. For ground that has to carry heavy equipment, 1 1/2 inch processed goes deeper than the 3/4 size.

Rip rap armors banks and culvert outlets against runoff.

Order bulk aggregate for your Providence County project

Rhode Island Rock Supply delivers gravel, stone, sand and topsoil across Providence County, from Providence and Cranston to Smithfield, Greenville and Pascoag. Order online, choose your quantity by the ton or yard, and pick a delivery date at checkout.

A dump truck tips the load on site. Place your order when you are ready.

Towns we deliver to in Providence County

Frequently Asked Questions

Common questions about gravel and aggregate delivery in Providence County

What is processed gravel and what is it used for in Providence County?

Processed gravel is aggregate crushed or screened from natural boulder, cobble and gravel. In Providence County it bases driveways, parking pads, walkways and shed floors. Yards sell it as 3/4 processed for residential drives and 1 1/2 inch processed for deeper bases.

How deep should a gravel driveway base be in Providence County?

Depth depends on what the drive has to carry and what the ground under it does. Frost depth here is 40 inches by state code, and the town building official sets footing depth. This county spans more than one ground region, so a lot on made ground in the bay lowland and a lot on stony till in the western uplands do not behave the same way. Size the load on the calculator once you settle the depth.

How much gravel do I need for my project?

Quantities are ordered by the ton or by the yard. Each product page has a calculator, so you can size the load for your own project and order the figure it gives you. If your ground is made ground or stony till, check the depth against your site conditions before you order.